Dimethylphosphite or Dimethyl phosphite SDS GHS of Manufacturers

Anmol Chemicals is the pioneer manufacturers of Dimethylphosphite or Dimethyl phosphite, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Dimethylphosphite or Dimethyl phosphite made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Dimethylphosphite or Dimethyl phosphite is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Dimethylphosphite or Dimethyl phosphite SDS GHS of Manufacturers

CAS Number: 868-85-9, EINECS EC Number: 212-783-8, Molecular Formula: (CH3O)2P(O)H or C2H7O3P, Molecular Weight: 110.05

Dimethylphosphite or Dimethyl phosphite SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet

Product Name & Other Names: Dimethylphosphite or Dimethyl phosphite.
CAS No.: 868-85-9
EINECS EC Number: 212-783-8
Molecular Weight: 110.05
Chemical Formula: (CH3O)2P(O)H or C2H7O3P

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin sensitization Category 1, H317
Serious eye damage Category 2, H319
Germ cell mutagenicity (Category 2), H341
Carcinogenicity Category 2, H351
Long-term (chronic) aquatic hazard (Category 3), H412

Hazard statements:
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H341: Suspected of causing genetic defects.
H351: Suspected of causing cancer.
H412: Harmful to aquatic life with long lasting effects.

Precautionary statements:
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P264 Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn Harmful.
Xi Irritant.
Risk Phrases:
R36 Irritating to eyes.
R40 Limited evidence of a carcinogenic effect.
R43 May cause sensitization by skin contact.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R62 Possible risk of impaired fertility.

Product Name & Other Names: Dimethylphosphite or Dimethyl phosphite.
CAS No.: 868-85-9
EINECS EC Number: 212-783-8

Inhalation: Allow the victim to rest in a well-ventilated area. Seek immediate medical attention.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes and wash before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention immediately.

Fire: Combustible liquid.
Explosion: Vapors in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide. Use water spray to cool unopened containers.
Special hazards arising from the substance or mixture: Carbon oxides, Oxides of phosphorus.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Dilute with water and mop up or absorb with an inert dry material and place in an appropriate waste disposal container.
Large Spill: Contain spilled material. Cover with an inert material and put the spilled material in an appropriate waste disposal.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizers, strong bases, strong acids, acid chlorides. Store away from sources of heat, moisture.

Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g., lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Colorless liquid.
Odor: Mild odor.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.2
Melting point/freezing point: -60C literature.
Initial boiling point and boiling range: 170-171C literature.
Flash point: 71C.
Auto-ignition temperature: 237C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water.
Viscosity: Not available.

Stability: Stable under ordinary conditions of use and storage. Moisture sensitive.
Hazardous Decomposition Products: When heated to decomposition it emits toxic fumes, carbon and phosphorous oxides may form.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizers, strong bases, strong acids, acid chlorides.
Conditions to Avoid: Incompatibles, heat, light, moisture.

Acute toxicity:
LD50 Oral Rat - 3040 mg/kg.
LC50 Inhalation Rat- 6 h: > 7100 mg/m3.
Carcinogenic Effects: IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans.
Mutagenic Effects: Mutagenic category 2
Reproductive Effects: Reproductive toxicity cannot be ruled out.

Toxicity to fish: static test LC50 - Danio rerio (zebra fish) - > 100 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 24,8 mg/l - 48 h.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with law.

DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA/ICAO: Not regulated.

European Labeling in Accordance with EC Directives:
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H341: Suspected of causing genetic defects.
H351: Suspected of causing cancer.
H412: Harmful to aquatic life with long lasting effects.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. In no case shall our company be liable to loss or damages by the product user.
**************************

Dimethylphosphite or Dimethyl phosphite manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.